Being a leader in both the firearms and ammunition industry Remington knows how important it is to have the highest quality ammunition available to make your firearm perform to its fullest potential. This starts with using the best components possible to manufacture ammunition. These are the same primers Remington uses in the production of their own ammunition and performs to their highest standards. If you want the best possible out of your firearm you have to start with the best that’s why reloaders choose Remington components for their loads.
Within every Remington primer is a group of subcomponents assembled to exceptionally tight tolerances. Primer cup dimensions are controlled to .0001″, and the priming mix is specially formulated for consistent ignition with a wide variety of powder types. Primers are tested for reliability from -20 degrees F to +150 degrees F. The unique tripod anvil design creates a larger strike area with maximum sensitivity, even with off center firing pin strikes.
Warning:
- Remington does not recommend this primer for use in the 17 Remington, 222 Remington, 223 Remington, 204 Ruger, 17 Remington Fireball. Use the 7-1/2 Small Rifle Bench Rest primer in these cartridges.
- This 6-1/2 Small Rifle primer is primarily designed for use in the 22 Hornet.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to – www.P65Warnings.ca.gov.
Reviews
There are no reviews yet.